TMS zl Management and Configuration Guide ST.1.1.100226

7-48
Virtual Private Networks
Configure an IPsec Client-to-Site VPN
Figure 7-34. VPN > Certificates > IPsec Certificates Window
12. Click Retrieve Certificate through SCEP under Certificates.
Figure 7-35. Retrieve IPsec Certificate through SCEP Window
13. For Subject Name, typically you type the TMS zl Module’s FQDN after /CN=.
The remote tunnel endpoint will use this subject name to authenticate the
module. Therefore, the subject name must match a remote ID that is
configured on the remote endpoint. You should also specify this name for
the local ID value in the IKE policy (the type is Distinguished Name).