TMS zl Management and Configuration Guide ST.1.1.100226

7-50
Virtual Private Networks
Configure an IPsec Client-to-Site VPN
21. Next, you should install the CRL. Ask your CA administrator if you need
a particular CGI path to the CRL distribution point. If you do, follow these
steps:
a. Click the SCEP tab.
b. For CGI-Path, type the new path given to you by your CA.
For example, for a Windows 2008 CA, you might type /CertEnroll/
<domainname-CAname>.crl.
c. Click Apply My Changes.
22. Click the CRL tab.
Figure 7-37. VPN > Certificates > CRL Window
23. Click Retrieve CRL through SCEP.
Figure 7-38. Retrieve CRL through SCEP Window
24. For Trusted Certificate, select the CA certificate that you imported
with SCEP.
25. Click Apply.
The CRL is displayed in the VPN > Certificates > CRL window.