TMS zl Management and Configuration Guide ST.1.1.100226

7-105
Virtual Private Networks
Configure an IPsec Site-to-Site VPN with IKE
10. Click Save.
Create an IPsec Policy for a Site-to-Site VPN that Uses
IKE
This section explains how to configure an IPsec policy for an IPsec SA that is
established between two gateway devices using IKE. The IPsec policy
includes the settings that are negotiated during IKE phase 2 and also selects
traffic for the VPN connection.
Follow these steps to create the IPsec policy:
1. In the left navigation bar of the Web browser interface, click VPN > IPsec.
2. Click the IPsec Policies tab.
Figure 7-92. VPN > IPsec > IPsec Policies Window
3. Click Add IPsec Policy. The Add IPsec Policy window is displayed.