TMS zl Management and Configuration Guide ST.1.1.100226

7-148
Virtual Private Networks
Configure an L2TP over IPsec VPN
Table 7-15. Valid Remote IDs for an L2TP over IPsec VPN to Windows Clients
9. Click Next.
Figure 7-124. Add IKE Policy Window—Step 2 of 3
10. Under IKE Authentication, configure the authentication method for the IKE
proposal:
a. For Key Exchange Mode, select Main Mode.
Main mode is required for the Windows L2TP clients.
b. For Authentication Method, select Preshared Key.
c. Type a string of 12 to 49 alphanumeric or special characters in the
Preshared Key box. Type the same string in the Confirm Preshared
Key box.
Remote ID Type Remote ID Value for Preshared Key
IP Address 0.0.0.0
Domain Name <domainname>
Example: procurve.com
Email not applicable
Distinguished Name not applicable