TMS zl Management and Configuration Guide ST.1.1.100226

7-167
Virtual Private Networks
Configure an L2TP over IPsec VPN
Figure 7-142. Network > Authentication > L2TP Users Window (Dial-in User Added)
Move on to the next task: “Create Access Policies for an L2TP over IPsec VPN”
on page 7-174.
Configure L2TP Authentication to an External RADIUS
Server
When authenticating users to an external RADIUS server, you must:
1. Create user groups.
See “Create a User Group” on page 7-168.
2. Specify a RADIUS server for the TMS zl Module to use (if you have not
already done so).
See “Specify a RADIUS Server” on page 7-169.
3. Configure RADIUS authentication for L2TP.
See “Configure RADIUS Authentication for L2TP” on page 7-170.
4. Set up the external RADIUS server to work with the TMS zl Module.
See “Set Up a RADIUS Server to Work with the TMS zl Module” on page
7-173.