TMS zl Management and Configuration Guide ST.1.1.100226

7-210
Virtual Private Networks
Configure a GRE over IPsec VPN with IKE
Table 7-23. Possible Named Objects for a GRE over IPsec VPN
Figure 7-171. Example GRE over IPsec VPN
Create a GRE Tunnel
Follow these steps to create a GRE tunnel:
1. In the left navigation pane of the Web browser interface, select VPN > GRE.
2. You are at the GRE Tunnels tab.
Example
Figure
Reference
Named Object Description Named Object Type Location Where the Named
Object is Specified
1 The TMS zl Module IP address
that acts as the local gateway for
the tunnel
Single-entry IP address object • Local Address in the IPsec
policy traffic selector
• Source or Destination for
firewall access policies that
permit GRE and IKE traffic
2 The IP addresses of local
endpoints that use the tunnel
Single-entry or multiple-entry IP,
range, or network address
objects
Source or Destination for firewall
access policies that permit traffic
sent across the VPN
3 The remote tunnel gateway’s
actual IP address
Single-entry IP, range, or network
address object
• Remote Address in the IPsec
policy traffic selector
• Source or Destination for
firewall access policies that
permit GRE and IKE traffic
4 The IP addresses of endpoints
behind the remote tunnel
gateway
Single-entry or multiple-entry IP,
range, or network address
objects
Source or Destination for firewall
access policies that permit traffic
sent across the VPN