TMS zl Management and Configuration Guide ST.1.1.100226

7-346
Virtual Private Networks
GRE Examples
5. Create single-entry IP address objects for the remote endpoints of the
primary and secondary GRE tunnels.
a. For Name, type siteAinterPrimary.
b. For Type, select IP.
c. Select Single-entry and type 172.23.20.99.
d. Click Apply.
e. For Name, type siteAinter2nd.
f. For Type, select IP.
g. Select Single-entry and type 172.23.21.99.
h. Click Apply.
6. Create single-entry IP address objects for the local endpoints of the
primary and secondary GRE tunnels.
a. For Name, type siteBinterPrimary.
b. For Type, select IP.
c. Select Single-entry and type 192.168.55.22.
d. Click Apply.
e. For Name, type siteBinter2nd.
f. For Type, select IP.
g. Select Single-entry and type 192.168.56.22.
h. Click Apply.
7. Click Close.
8. Create address groups for the GRE tunnel endpoints at each site.
a. Click the Address Groups tab.
b. Click Add Address Group.
c. For Group Name, type siteAinterfaces.
d. From the Available Addresses list, select siteAinterPrimary.
e. Click the Move Right button to move the object into the Group Members
list.
f. From the Available Addresses list, select siteAinter2nd.
g. Click the Move Right button to move the object into the Group Members
list.
h. Click Apply.
i. For Group Name, type siteBinterfaces.
j. From the Available Addresses list, select siteBinterPrimary.
k. Click the Move Right button to move the object into the Group
Members list.