TMS zl Management and Configuration Guide ST.1.1.100226

7-358
Virtual Private Networks
Manage VPN Connections and GRE Tunnels
■ Remote Gateway—the remote IP addresses in the traffic selector for this
policy
■ Status—click the View status link to see more details. The Status window
for that SA is displayed.
Figure 7-305. Status (<IPsec Policy> -
<SA Number>) Window
This window displays this information about the IPsec tunnel:
■ Destination IP Address—the remote gateway IP address (for a site-to-site
VPN) or the remote client IP address (for a client-to-site VPN)
■ Encapsulation Mode—the IPsec mode (Transport or Tunnel)
■ Direction—the direction for traffic secured by this SA (Inbound to the
module or Outbound to the remote gateway or remote client)
Inbound SAs decrypt and de-encapsulate traffic that is inbound to the TMS
zl Module. Outbound SAs encrypt and encapsulate traffic that the module
is forwarding.
■ Security Protocol—the IPsec protocol selected for this SA by the IPsec
proposal (ESP or AH)
■ HardLife Time In Seconds—the number of seconds before the SA expires
■ SoftLife Time in Seconds—the number of seconds before the TMS zl Module
will begin renegotiating the SA (unless the soft lifetime in KB expires first)
■ HardLife Time in KB—the number of kilobytes that the SA is allowed to
carry before it expires
■ SoftLife Time in KB—the number of kilobytes that the SA will carry before
the TMS zl Module begins renegotiating the SA (unless the soft lifetime in
seconds expires first)