TMS zl Management and Configuration Guide ST.1.1.100226

7-369
Virtual Private Networks
Configure an HP ProCurve VPN Client
10. In the left navigation pane, expand the connection and click My Identity.
Figure 7-315. ProCurve VPN Client—Security Policy Editor—New Connection >
My Identity Window
11. Configure authentication settings to match the settings on the TMS zl
Module:
• If you selected RSA Signature or DSA Signature for the authentication
method in the TMS zl Module IKE policy, you can leave the default
setting for Select Certificate: Select automatically during IKE negotiation.
You must, however, install a valid certificate on the endpoint. A valid
certificate is signed by a CA for which the TMS zl Module has a CA
certificate installed. It should also include a subject name that
matches, in both type and value, the remote ID specified in the TMS zl
Module’s IKE policy.
• If you selected Preshared Key for the authentication method in the
TMS zl Module IKE policy, follow these steps:
i. For Select Certificate, select None.
ii. Click Pre-Shared Key.