TMS zl Management and Configuration Guide ST.1.1.100226

7-375
Virtual Private Networks
Configure an HP ProCurve VPN Client
Figure 7-320. ProCurve VPN Client—Security Policy Editor—Security Policy
21. For Select Phase 1 Negotiation Method, match the Key Exchange Mode
setting in the TMS zl Module’s IKE policy. Select either Main Mode or
Aggressive Mode.
22. If you enabled PFS in the module’s IPsec policy, select the Enable Perfect
Forward Secrecy (PFS) check box. For PFS Key Group, match the group
setting in the module’s IPsec policy.
23. Click the Save button.
24. To initiate the connection, right-click the HP ProCurve VPN Client icon in
the system tray. Click Connect > My Connections > <connection name>.
After a minute or so, the connection should be established.
TMS zl Module Settings for the HP ProCurve VPN Client
Table 7-34 displays the settings that should be established on the TMS zl
Module to support the IPsec connection to the ProCurve VPN client. The table
also displays necessary firewall policies. Finally, note that VLANs and neces-