TMS zl Management and Configuration Guide ST.1.1.100226

7-397
Virtual Private Networks
Configure a Windows XP SP2 Client for L2TP over IPsec
For this method, see “Manual Windows XP Client Configuration” on
page 7-411.
On the TMS zl Module, you must configure L2TP over IPsec settings as
described in “Configure an L2TP over IPsec VPN” on page 7-142. See “TMS
zl Module Settings with a Windows XP Client (Manual Configuration)” on
page 7-443 for a table that shows all necessary settings.
Configuration with the New Connection Wizard
Before you configure the VPN connection, make sure to uninstall the HP
ProCurve VPN client or any other third-party VPN client; these clients can
interfere with the Windows XP client.
Follow these steps to configure the Windows XP SP2 client:
1. On the Windows XP client, open the Network Connections window.
2. Click New Connection Wizard.
3. The wizard is launched. Click Next.
4. Select Connect to the network at my workplace.
Figure 7-340. Windows XP—New Connection Wizard
5. Click Next.
6. Select Virtual Private Network connection.