Manualshelf

TMS zl Management and Configuration Guide ST.1.1.100226

ManualsBrandsHP ManualsComputer AccessoriesHP ProCurve Switch xl Access Controller Module
921922923924925926927928929930
7-419
Virtual Private Networks
Configure a Windows XP SP2 Client for L2TP over IPsec
Figure 7-366. Windows XP—Filter Properties Window >
Addressing Tab (Addresses Configured)
29. Select the Protocol tab.
30. For Select a protocol, select UDP.
31. In the Set the IP protocol port section, select From this port.
32. Type 1701 in the box below.
33. In the Set the IP protocol port section, select To this port.
34. Type 1701 in the box below.