TMS zl Management and Configuration Guide ST.1.1.100226

7-437
Virtual Private Networks
Configure a Windows XP SP2 Client for L2TP over IPsec
77. If the Public Network page is displayed, specify whether the VPN connec-
tion should use a dial-up connection. If the workstation’s Internet connec-
tion is through a dial-up connection, select that connection for
Automatically dial this initial connection. Otherwise, select Do not dial the
initial connection.
78. For Host name or IP address, type the TMS zl Module’s public IP address or
type an FQDN that resolves to this address.
This IP address or FQDN must be the Local Gateway IP Address in the IKE
policy configured on the TMS zl Module. Often, it is the IP address on a
VLAN in the External zone.
Figure 7-388. Windows XP—New Connection Wizard > VPN Server
Selection Page
79. Click Next.
80. If the Smart Cards page is displayed, complete these steps:
a. Select Do not use my smart card.