TMS zl Management and Configuration Guide ST.1.1.100226

7-489
Virtual Private Networks
Configure a Windows Vista Client for L2TP over IPsec
Finally, when you authenticate L2TP users to an external RADIUS server,
remember to check your RADIUS server’s set up (see “Set Up a RADIUS Server
to Work with the TMS zl Module” on page 7-173).
Table 7-42. Settings for an L2TP over IPsec Connection on the TMS zl Module
Parameter Valid Settings Configuration Window Matching Setting on the
Windows Vista Client
IKE policy
Policy Type Client-to-Site (Responder) Add IKE Policy—Step 1 of 3
Local Gateway TMS zl Module’s IP address or VLAN that
the remote clients can reach
• Destination address in
the IP filter (step 28 on
page 7-459)
• Internet address for
the VPN connection
(step 71 on page 7-480)
Local ID Type IP Address
Local ID Value Same IP address configured for the Local
Gateway
Remote ID Type • With preshared keys, IP Address
• With digital certificates, the type for
the subject name in the certificate
(typically, Distinguished Name or
Domain Name)
Remote ID Value • With preshared keys, 0.0.0.0
• With digital certificates, a value or
wildcard that matches the certificate
subject name