TMS zl Management and Configuration Guide ST.1.1.100430

9-23
Routing
RIP
Note You must set the same password or key for each interface on a network, but
you can set different passwords or keys for different networks. However, you
must use the same type of authentication (none, simple, or MD5) for every
network in an area.
Example RIP Setup
Figure 9-7 shows an example RIP router setup using TMS zl Modules.
Figure 9-7. Example RIP Router Setup with TMS zl Modules
Below is a sample of the settings and routing tables on each module after all
routes have been communicated.