TMS zl Management and Configuration Guide ST.1.1.100430

10-11
Troubleshooting
Basic Troubleshooting Tools
Table 10-3. show Commands for the TMS zl Module in Routing Mode Only
Command Syntax Description
show access-policy show access-policy [group <group
name> | multicast] [filter <source
zone> <destination zone>
Displays the firewall access policies currently
configured on the module. When options are
included, it displays policies by:
• Type of policy (multicast or unicast)
•User group
• Source zone
• Destination zone
show alg show alg Displays the module’s application level gateways
(ALGs) and whether they are enabled or disabled.
show connection-
settings
show connection-settings < limit |
timeout [default] | reservation >
Displays the connection restriction settings:
• Connection limits for each zone
• Service and default connection timeouts
• Connection reservations for zones
show ip show ip Displays all the TMS VLANs and the IP address that
are assigned to them.
show ip ospf
• show ip ospf general
• show ip ospf area
• show ip ospf area-link-state
• show ip ospf external-link-state
[router-id <IP address>]
• show ip ospf interface [<IP
address> | vlan <VLAN ID>]
• show ip ospf neighbor
• show ip ospf data grace-link-state
• show ip ospf redistribute
• show ip ospf restrict
Displays information about OSPF on the network:
• General information
•Areas
• Area link-states
• External link-states
• OSPF on a particular interface
• Neighbors
• Data grace link-state information
• Redistribution
• Restrictions
show ip rip
• show ip rip redistribute
• show ip rip interface [<IP address>
| vlan <VLAN ID>
• show ip rip peer [IP address]
• show ip rip restrict
Displays information about RIP on the network:
• Redistribution
• RIP on a particular interface
• (Optional) RIP peers
• Restrictions
show schedule show schedule Lists the module’s schedule objects. Each object’s
name and the associated days and times are
displayed.