TMS zl Management and Configuration Guide ST.1.1.100430

10-122
Troubleshooting
Troubleshooting the TMS zl Module in Routing Mode
For example:
hostswitch(tms-module-C)# copy snapshot scp
172.16.40.10 par.ss user feng
Password: ********
Success: Copied snapshot file to: Host:172.16.40.10
File:par.ss ProCurve-TMS-zl-Module# "
Verify that the snapshot file was copied to the external server.
You may want to monitor the traffic between the master and participant
to ensure that these steps have no impact on the master. There should be
no session synchronization for the sessions established between the
participant and the external hosts.
13. Return to the global configuration context:
hostswitch(tms-module-C)# configure
14. Delete the VLAN you created on the participant and verify it was deleted.
For example:
hostswitch(tms-module-C:config)# no vlan 40
Success: Removed VLAN 40
hostswitch(tms-module-C:config)# show vlans
Internet (IP) Service
IP routing: enabled
Default gateway:
Domain suffix: example.com
DNS server:
ID VLAN Zone IP Config IP Address Subnet Mask
-- ---- ---- --------- ---------- -----------
*20 VLAN20 ZONE1 static
*: Allow IP from switch on this VLAN.