TMS zl Management and Configuration Guide ST.1.1.100430

A-18
Command-Line Reference
Services OS Manager Context Commands
The commands in this section are the Services OS CLI commands with the
Services OS booted.
Figure A-4. Services OS
To access all commands in the Services OS manager context, you must boot
the module in the Services OS using the boot command. Until the module is
booted in the Services OS, you can access a limited set of commands, including
boot, licenses, exit, and some show commands.
The following sections describe commands that are available from the man-
ager context of the Services OS.
boot
This command allows you to boot the module’s different operating systems.
You can boot the Services OS, the Product OS, and the CF Services OS.
To boot an OS, enter the following command:
Syntax: boot [ service | product | cf_service ]
The module will tell you that you are changing operating systems and that the
module will reboot. You will be prompted to continue.
If you do not select an OS, the module will simple be rebooted in the
current OS.
For example, to boot the Product OS, enter the following command:
ProCurve(services-module-<slot ID>)# boot product
Changing boot from Service OS to Product OS.
System will be rebooted. Do you want to continue [y/n]?