TMS zl Management and Configuration Guide ST.1.1.100430

A-20
Command-Line Reference
Services OS Manager Context Commands
ip
This is the only configuration command available from the Services OS
manager context. It allows you to configure the module’s IP address and
default gateway.
To configure the module’s IP address, enter the following command:
Syntax: [no] ip < dhcp | address <module IP address/prefix length>>
Use the dhcp option to configure the module to receive a dynamic IP address.
Replace <module IP address/prefix length> with the module’s IP address and the
prefix length for the subnet.
To configure the module’s default gateway, enter the following command:
Syntax: [no] ip default-gateway <gateway IP address> >
Replace <gateway IP address> with the IP address the module’s default gate-
way.
licenses
Use this command to manage your licenses.
To install operating system licenses, enter the following command:
Syntax: licenses install < activation | tms-subscription > <key>
Replace <key> with the activation key you received with your licenses.
Syntax: licenses hardware-id < activation | tms-subscription >
To uninstall hardware licenses, enter the following command:
Syntax: licenses uninstall activation 0
page
This command enables and disables page mode. In page mode, the terminal
output will pause when it fills the screen and wait for a keystroke such as
space
or Ctrl+C.
Syntax: [no] page