TMS zl Management and Configuration Guide ST.1.1.100430

A-33
Command-Line Reference
Product OS Manager Context Commands
Product OS Manager Context
Commands
The Product OS manager context is used to configure the firewall, IDS or IPS,
VPN, and other features provided by the TMS zl Module. To access the Product
OS manager context, first access the manager context of the CLI of the switch
in which the TMS zl Module resides as a manager:
You can also access the manager context of the Product OS in two other ways:
■ By accessing the Products OS operator context and then entering the
enable command
■ By accessing the TMS zl Module through SSH and logging in as a manage-
ment user with manager rights
The SSH client must be able to contact a TMS zl Module IP address.When
the TMS zl Module operates in routing mode, the SSH client must also be
in a management zone.
TMS zl Module Product Index and Product Name
To enter the TMS zl Module CLI’s Product OS, you must either specify the
module’s product name or product number. The product name for the TMS zl
Module is always tms-module.
Syntax: services <slot ID> < <product index> | name <product name> >
Moves you to an OS context on the module.
Replace <slot ID> with the letter for the chassis slot in
which the module is installed.
Replace <product index> with the product index assigned
tot he TMS zl Module. See “Understanding Index Num-
bers” on page 2-18 of Chapter 2: “Initial Setup in Routing
Mode.”
Replace <product name> with tms-module. The TMS zl Mod-
ule’s Product OS context is always assigned product name
tms-module.