TMS zl Management and Configuration Guide ST.1.1.100430

A-35
Command-Line Reference
Product OS Manager Context Commands
Table A-7 provides an example of a host switch that is running:
■ DCM on a ONE Services zl Module
■ TMS zl Module
On this host switch, DCM was installed and booted first, so the host switch
assigned it index number 2. It then assigned the TMS zl Module index number 3.
Table A-7. CLI Display of Services
For example, if you want to enter the Services OS for the TMS zl Module in
slot C, enter one of the following commands:
hostswitch# services c 3
hostswitch# services c name tms-module
To verify your location in the CLI, check the prompt. In the Product OS
manager context, the prompt is ProCurve(tms-module-<slot ID>)#.
Figure A-9. Product OS Context
The following sections describe commands that are available from the man-
ager context of the Product OS.
batch
This command enables and disables batch, or scripting, mode. Turning on
batch mode will put the CLI into a state that facilitates scripting: paging will
be disabled and any user prompts (for example, Do you want to continue? [y/
n]) will be suppressed.
Slot Index Description Name
C,D, E 1. Services zl Module services-module
D 2. Data Center Connection Manager dcm
C,E 3. Threat Management Services zl Module tms-module