TMS zl Management and Configuration Guide ST.1.1.100430

A-40
Command-Line Reference
Product OS Manager Context Commands
exit
To leave a specific interface or configuration mode, enter exit. The exit
command moves you back one mode level. For example, if you were in the
HA configuration context and entered exit, you would return to the global
configuration context.
Syntax: exit
This command is available from all contexts.
logout
Exit the current CLI session and return to the login screen.
Syntax: logout
no connections
This command is available only when the TMS zl Module operates in routing
mode.
To close existing connections for a specific source or destination address,
source or destination port, or access policy, enter the following:
Syntax: no connections [sip <source IP address>] [dip <destination IP address>] [sp
<source port>] [dp <destination port>] [pid <access policy number>]
Replace <source IP address> with IP address for which you want to close all
outbound connections.
Replace <destination IP address> with IP address for which you want to close
all inbound connections.
Replace <source port> with port for which you want to close all outbound
connections.
Replace <destination port> with port for which you want to close all inbound
connections.
Replace <pid> with the ID for the access policy that allowed the connections
that you want to close.
nslookup
This command is used to learn a device’s IP address according to its hostname.