TMS zl Management and Configuration Guide ST.1.1.100430

A-42
Command-Line Reference
Product OS Manager Context Commands
For example, to send a ping to a device with the IP address 192.168.115.104:
ProCurve(tms-module-<slot ID>)# ping 192.168.115.104
When you send ICMP echoes, the module displays the ping statistics to
describe the types of responses the router receives. For example, Figure A-10
shows a successful ping:
Figure A-10. Sending a Ping
If you need to halt a ping operation, press
Ctrl+Z.
This command is also available from the global configuration mode context.
Note If you cannot ping a device, check that you have configured an access policy
to allow ICMP/Echo traffic from the Self zone to the zone you are trying to ping.
snapshot
This command creates a restore point for your network. The snapshot com-
mand captures information about the following:
■ Kernel
■ Hardware
■ Log files
■ Software
■ File systems
■ Networks
■ Services
■ Miscellaneous files
■ Third-party software
To take a snapshot, type the following command:
Syntax: snapshot