TMS zl Management and Configuration Guide ST.1.1.100430

A-61
Command-Line Reference
Global Configuration Context
Syntax: no certificates request <certificate request name>
Replace <certificate request name> with the name assigned to the certifi-
cate request when it was generated.
connection-settings
The connection-settings command allows you to set various restrictions on
connections to your network:
■ Absolute number of connections limits
■ Timeout limits
■ Resource allocation limits
Table A-17 gives the available options for the connection-settings command.
Table A-17. Options for the connection-settings Command
connection-settings limit
This command sets the absolute maximum number for connections that a
specified zone is allowed.
Syntax: connection-settings limit <zone> <connections>
Replace <zone> with the zone for which you are setting a connection limit.
Note If you renamed a zone using a keyword in the CLI (such as GRE, VPN, or L2TP),
include the zone name in quotation marks when you enter the connection-
settings command. If you do not use quotation marks, you will receive the error
message “Invalid input.”
Generally, it is best practices to avoid using a CLI keyword when you rename
a zone.
The available zones and their default connection-settings limits are shown in
Table A-18. If you have changed the name of one of these zones, you will type
your user-defined name instead.
Option Result
limit Sets number of connections allowed in each zone
timeout Sets timeout limits for inactive sessions
reservation Allows you to reserve firewall associations for specific
addresses or address ranges