TMS zl Management and Configuration Guide ST.1.1.100430

A-67
Command-Line Reference
Global Configuration Context
exit
To leave a specific interface or configuration mode, enter exit. The exit
command moves you back one mode level. For example, if you were in the
HA configuration context and entered exit, you would return to the global
configuration context.
Syntax: exit
This command is available from all contexts.
gre
With this command you can configure GRE tunnels. You can:
■ Create a GRE tunnel (page A-71)
■ Configure dynamic routing for a GRE tunnel (page A-68)
■ Enable keepalives on a GRE tunnel (page A-71)
■ Disable a GRE tunnel (page A-67)
■ Re-enable a GRE tunnel (page A-68)
■ Delete a GRE tunnel (page A-67)
no gre <tunnel name>
Enter the following command to delete a GRE tunnel:
Syntax: no gre <tunnel name>
Replace <tunnel name> with the character string that was configured for
this tunnel.
gre <tunnel name> disable
Enter the following command to disable a GRE tunnel:
Syntax: gre <tunnel name> disable
Replace <tunnel name> with the character string that was configured for
this tunnel.