TMS zl Management and Configuration Guide ST.1.1.100430

A-87
Command-Line Reference
Global Configuration Context
Replace <start IP address> and <end IP address> with the first and last
IP addresses in the range of addresses that the remote clients will be assigned.
This IP address range can include up to 10,160 IP addresses.
If you specify one or both of the dns options, replace <DNS server address>
with the IP address of a DNS server that the remote client can use to resolve
host names.
If you specify one or both of the wins options, replace <WINS server
address> with the IP address of a WINS server that the remote client is
allowed to access.
To disable RADIUS authentication for the L2TP VPN, enter the following
command:
Syntax: no l2tp radius-auth
To clear the IP settings that you have configured for a domain, enter the
following command:
Syntax: no l2tp radius-auth domain-config <domain name>
Replace <domain name> with the name of the domain for which you want
to clear the settings.
Example L2TP RADUS Authentication. This section includes all of the
commands necessary to configure the TMS zl Module to authenticate L2TP
clients to the RADIUS server with the parameters detailed in Table A-24.
Table A-24. Example L2TP RADIUS Authentication
Parameter TMS zl Module Setting
RADIUS Server
RADIUS server IP address 192.168.12.36
Secret key procurve
NAS ID tms-module
Domain name —
L2TP Server
Server IP address 10.2.2.1