TMS zl Management and Configuration Guide ST.1.1.100430

A-100
Command-Line Reference
Global Configuration Context
Table A-28. Services Available
To move a policy’s position, enter the following command:
Syntax: nat < source | destination | no-nat > <source zone> <destination zone> move
<from position> to <to position>
Replace <source zone> with the source zone of the policy that you want to
move.
Replace <destination zone> with the destination zone of the policy that you
want to move. The destination zone for a destination NAT policy must be Self.
Replace <from position> with the position that you are moving the position
from.
Replace <to position> with the position where you want the policy to be.
aol bgp biff bootpc
bootps chargen citrix-ica cmd
ctiqbe daytime discard-tcp discard-udp
dns-tcp dns-udp dnsix echo-tcp
echo-udp echo-udp exec finger
ftp ftp-data gopher h323
hostname http https ident
imap4 ipsec-nat-t-tcp ipsec-nat-t-udp irc
isakmp kerberos-tcp kerberos-udp klogin
kshell l2tp-tcp l2tp-udp ldap
ldaps login lotusnotes lpd
mobile-ip nameserver netbios-dgm netbios-ns
netbios-ssn nntp ntp ospf
pcanywhere-
data
pcanywhere-status pim-auto-rp-tcp pim-auto-rp-udp
pop2 pop3 pptp radius
radius-acct rip securied-udp smtp
snmp snmptrap sqlnet ssh
syslog tacacs-tcp tacacs-udp talk-tcp
talk-udp telnet tftp time
uucp who whois xdmcp
user configured
service objects