TMS zl Management and Configuration Guide ST.1.1.100430

A-102
Command-Line Reference
Global Configuration Context
For example, to change the manager password to $tms*manager33, you would
enter:
ProCurve(tms-module-<slot ID>:config)# password manager
New password for manager: $tms*manager33
Please retype new password for manager: $tms*manager33
ping
This command sends an ICMP echo to a specified destination.
Syntax: ping < IP address | hostname > [repetitions <1-100000>] [data-size <0-
65471>]
Replace <IP address> with the IP address of the ping destination.
Replace <hostname> with the host name of the ping destination.
Include the repetitions option if you want to send multiple pings.
Include the data-size option if you want to customize the size of the ping.
The module displays the number of pings sent and responses received.
For example:
ProCurve(tms-module-<slot ID>)# ping 10.1.1.1
When you send ICMP echoes, the module displays the ping statistics to
describe the types of responses the router receives. For example, Figure A-12
shows a successful ping:
Figure A-12. Sending a Ping
If you need to halt a ping operation, press
Ctrl+Z.
This command is also available from the Product OS manager context.