TMS zl Management and Configuration Guide ST.1.1.100430

A-121
Command-Line Reference
Global Configuration Context
zone
This command enables you to rename some zones according to your needs.
You can rename all the zones except the Self and External zones.
Note When renaming zones, it is best practices to avoid using CLI keywords (such
as GRE, VPN, or L2TP). If you use one of these key words, you will need to
include the zone name in quotation marks when you enter commands that
include a zone name as an option. Two examples are the access-policy and
connection-settings commands. (If you do not use quotation marks in these
commands, you will receive the error message “Invalid input.”)
Syntax: zone <zone name> rename <new name>
Replace <zone name> with the name of the zone you wish to rename.
Replace <new name> with the name you want to assign to the zone. The zone
name can be up to 16 characters long.
Note By press Tab when a zone name should be entered, you will see a complete list
of the all the static and dynamic zone names that have been configured. Also,
when the first part of a zone name has been entered, pressing
Tab will display
all of the zone names that match the letters typed.