TMS zl Management and Configuration Guide ST.1.1.100430

2-14
Initial Setup in Routing Mode
Deploying the TMS zl Module
Figure 2-6. Zones Inside the TMS zl Module
Figure 2-6 shows the zones and VLANs from Figure 2-5 as they might be
deployed in a network. Physical port 1, the data port, is tagged for all
TMS VLANs. Port 2 will forward HA traffic to the other member of the cluster
(if configured), but the IP address for port 2 is not in the Self zone. Port 2 is
an untagged member of the HA VLAN.