TMS zl Management and Configuration Guide ST.1.1.100430

A-139
Command-Line Reference
IPsec Policy Context
To exit the IPsec policy apply context, enter the following:
Syntax: exit
If you have not set all of the necessary configurations, you will be prompted
to do so and asked whether you actually want to exit.
advanced
The TMS zl Module supports these advanced features:
■ IP compression
■ Extended sequence number
■ Re-key on sequence number overflow
■ Persistent tunnels
■ Fragmentation before IPsec
■ Customizable anti-replay window size
■ The copying of values from the original IP header
The following command allows you to enable (or disable) the IPsec policy’s
advanced settings.
Syntax: [no] advanced <advanced options>
You can specify any of the extended options shown in Table A-23, but you can
enter only one option at a time. Table A-23 also describes the feature associ-
ated with the option and indicates the default setting.
Use the no option to disable a feature. (You cannot use this option with the
anti-replay-win-size option, which sets the size for the anti-replay window,
which is always enabled.)