TMS zl Management and Configuration Guide ST.1.1.100430

A-153
Command-Line Reference
IPsec Policy Context
Syntax: dns primary <IP address> [secondary <IP address>]
Replace <IP address> with the IP address of a DNS server that the remote
client is allowed to access.
wins. To configure the remote clients’ WINS servers while they are on the
VPN connection, enter the following command:
Syntax: wins primary <IP address> [secondary <IP address>]
Replace <IP address> with the IP address of a WINS server that the remote
client is allowed to access.
IPsec Policy Bypass Context
The IPsec policy bypass context includes the commands specific to configur-
ing a bypass IPsec policy. This type of policy selects traffic that is not secured
by an IPsec SA but is forwarded toward its destination. Refer to Chapter 7:
“Virtual Private Networks” for an explanation of when you require a bypass
policy. (This context is available only when the TMS zl Module is in routing
mode.)
Figure A-20. IPsec Policy Bypass Context
To enter the IPsec bypass context, enter the following command from the
IPsec policy context:
Syntax: action bypass