TMS zl Management and Configuration Guide ST.1.1.100430

A-170
Command-Line Reference
L2TP User Context
ProCurve(tms-module-<slot ID>:config)# user group
l2tpusers
ProCurve(tms-module-<slot ID>:config)# ipsec ikev1
L2tpIke
ProCurve(tms-module-<slot ID>:ikev1)# type client-to-
site local-gateway vlan 20
ProCurve(tms-module-<slot ID>:ikev1)# identities local
type ip-addr 172.16.20.103 remote type ip-addr 0.0.0.0
ProCurve(tms-module-<slot ID>:ikev1)# authentication
exchange-mode main method preshared-key
Preshared Key: procurvetestvpn
Confirm Preshared Key: procurvetestvpn
ProCurve(tms-module-<slot ID>:ikev1)# security-proposal
dh-group group2-1024 encryption 3des auth md5 sa-lifetime
28800
ProCurve(tms-module-<slot ID>:ikev1)# preview
Preview IKEv1 policy
---------------------------------------------
*Policy Name: L2tpIke
*Policy Type: Client-to-Site
*Local Gateway: VLAN 20 (VLAN20)
L2TP User—l2tpuser
Tunnel server IP address 10.100.1.1/24
Tunnel user IP address 10.100.1.80
Tunnel authentication No Authentication
Policy group name L2tpUsers
Authentication Protocol Any
User userx
Password procurve
Default gateway 10.100.1.1
Primary DNS server 10.1.2.100
Secondary DNS server 10.1.2.80
*Default setting that does not require configuration
Parameter TMS zl Module Setting