TMS zl Management and Configuration Guide ST.1.1.100430

A-182
Command-Line Reference
OSPF Context
For the authentication option, replace <authentication options> with one
of the following options.
■ md5 <key ID> <key>
■ simple <password>
For md5, replace <key ID> with the ID used in this area (1–255). Replace
<key> with the MD5 key, which is a string of up to 16 characters. For simple,
replace <password> with the password used in this area, a string of up 8
characters.
For the hello-interval option, replace <interval> with the number of sec-
onds between sending hellos to the neighbor (1–65535).
For the dead-interval option, replace <interval> with the number of sec-
onds that the module can fail to receive a hello from the neighbor before
considering the neighbor unreachable (1–65535).
For the retransmit-interval option, replace <interval> with the number of
seconds between sending LSAs (1–65535).
For the transmit-delay option, replace <delay> with the number of seconds
assumed for messages to reach the neighbor (1-3600).
no area
To delete an OSPF area, enter the following command:
Syntax: no area <area ID> [virtual-link < <neighbor ID> [ authentication < md5 |
simple <key> > | hello-interval <interval> | dead-interval <interval> | retransmit-
interval <interval> | transmit-delay <delay> > ]