TMS zl Management and Configuration Guide ST.1.1.100430

A-197
Command-Line Reference
Product OS Show Commands
To view general information about OSPF, enter the following command:
Syntax: show ip ospf general
To view information about OSPF areas, enter the following command:
Syntax: show ip ospf area
To view information about OSPF area link-states, enter the following
command:
Syntax: show ip ospf area-link-state
To view information about OSPF external link-states, enter the following
command:
Syntax: show ip ospf external-link-state [router-id <IP address>]
Replace <IP address> with the IP address of the router.
To view OSPF on a particular interface, enter the following command:
Syntax: show ip ospf interface [ <IP address> | vlan <VLAN ID> ]
Replace <IP address> with the interface IP address.
Replace <VLAN ID> with the VLAN ID.
To view the module’s OSPF neighbors, enter the following command:
Syntax: show ip ospf neighbor
To view the module’s grace link-state, enter the following command:
Syntax: show ip ospf data grace-link-state
To view OSPF redistribution, enter the following command:
Syntax: show ip ospf redistribute
To view restricted addresses, enter the following command:
Syntax: show ip ospf restrict
show ip route
To view the TMS zl Module’s routing table, enter the following command
Syntax: show ip route