TMS zl Management and Configuration Guide ST.1.1.100430

A-198
Command-Line Reference
Product OS Show Commands
This command displays:
■ Destination—Each network to which the module knows a route
■ Gateway—The IP address of the next-hop router in the path to this
network
■ Metric—The cost for the route
■ Distance—The administrative distance for the route
■ VLAN—The forwarding VLAN for the route
■ Type—The method by which the route was discovered or configured
show ip mroute
To view the TMS zl Module’s multicast routing table, enter the following
command:
Syntax: show ip mroute
This command displays:
■ Group Address—Each multicast group for which the module knows a
route
■ Source Address—The IP address of the multicast source for that group
■ Neighbor—The IP address of the next router in the path to that source
■ VLAN—the VLANs out which the module forwards multicast traffic for
this group
show ip pim
To view PIM settings (such as the VLANs on which PIM is enabled and the
TMS zl Module’s DR priority), enter the following command:
Syntax: show ip pim
To view the list of RPs which the TMS zl Module has discovered, enter the
following command:
Syntax: show pim rp-set
show ip igmp
To view the status of IGMP as well as IGMP counters, enter the following
command:
Syntax: show ip igmp