TMS zl Management and Configuration Guide ST.1.1.100430

A-199
Command-Line Reference
Product OS Show Commands
To view IGMP settings (such as the VLANs on which IGMP is enabled), enter
the following command:
Syntax: show ip igmp config
show ip dns
To view the TMS zl Module’s domain and DNS server, enter the following
command:
Syntax: show ip dns
show ip-mtu
This command shows the module’s MTU.
Syntax: show ip-mtu
show ip-reassembly
This command shows the IP reassembly constraints.
Syntax: show ip-reassembly
show ips
This command shows your IPS settings. With the show ips command you can
view the following settings:
■ Threat mitigation
■ Signatures
■ Web-proxy
■ Protocol anomaly
■ (Optional) Full inspection
To view the threat mitigation settings, enter the following command:
Syntax: show ips threat-level
You can view a signature list, signature status, and update intervals. To view
these settings, enter the following command:
Syntax: show ips signatures < list | status | update | <signature family> <signature
ID> description >