TMS zl Management and Configuration Guide ST.1.1.100430

A-201
Command-Line Reference
Product OS Show Commands
■ IPsec policies
Enter the following command:
Syntax: show ipsec policy [policy name]
To view detailed information about only one policy, replace [policy
name] with the name of a specific policy. Otherwise, all IPsec policies
are displayed (with less information about each).
■ IKE mode config IP address pools
To view the settings configured for IKE mode config IP address pools in
IPsec policies, enter the following command:
Syntax: show ipsec ip-address-pool records
To view the IKE mode config IP addresses currently assigned to remote
VPN clients, enter the following command:
Syntax: show ipsec ip-address-pool sessions
show l2tp
Use this command to view information about L2TP authentication.
To see whether authentication to an external RADIUS server is enabled and
to view the TMS zl Module’s virtual IP address as the L2TP server, enter the
following command:
Syntax: show l2tp radius-auth
To view the IP settings configured for users who authenticate to external
RADIUS servers, enter the following command:
Syntax: show l2tp radius-auth domain-config [domain name]
Optionally, replace [domain name] with the domain you want to view. In this
case, you will see detailed information about the IP settings for the domain.
If you do not specify a domain name, this command lists all domains with more
limited information about the IP settings.
To view your local L2TP users, enter the following:
Syntax: show l2tp user [username]
Optionally, replace [username] with the name of a specific user. In this case,
you will see detailed information about the user. If you do not specify a user
name, this command lists all local L2TP users with more limited information
about them.