TMS zl Management and Configuration Guide ST.1.1.100430

A-202
Command-Line Reference
Product OS Show Commands
show lldp
This command shows the LLDP configuration.
Syntax: show lldp
show logging
This command shows all of the logging information. You can view information
about:
■ Local logging (and reverse local logging)
■ Syslog forwarding
■ Email forwarding
■ SNMPv2 and SNMPv3 trap destinations
■ Logging thresholds
To view the local logging information, enter the following command:
Syntax: show logging local [reverse] [filter options]
This command will display the local log with the most recent first. Optionally,
enter reverse to display the most recent log last.
You can set filter options for refining the logging information that is displayed
by typing additional keywords at the end of the command. You can specify
several combinations of the extended options shown in Table A-50, and you
can enter the options in almost any order.
Table A-50. Log Filtering Options
Extended Command Option Purpose
filter id <message ID> Returns only the local logs with the specified message ID
filter search <search string> Returns only the local logs that include the specified search
string
filter severity < critical | major |
minor | warning | information>
Returns only the local logs with the specified severity
filter sip <source IP address> Returns only the local logs with the specified source IP
address
filter dip <destination IP
address>
Returns only the local logs with the specified destination IP
address