TMS zl Management and Configuration Guide ST.1.1.100430

A-203
Command-Line Reference
Product OS Show Commands
To view whether other types of logging is enabled and, if so, the settings, enter
the following command:
Syntax: show logging < syslog | email | snmpv2 | snmpv3 >
Choose the option for the type of logging that you want to view.
To view the logging threshold and throttling parameters, enter the following
command:
Syntax: show logging threshold [monitor]
The monitor option shows whether the log threshold monitor is enabled.
show management
In monitoring mode, this command shows the management VLAN and IP
address.
In routing mode, this command lists all of the management-access zones.
Syntax: show management
show nat
This command shows your NAT policies.
Syntax: show nat
show operating-mode
Use this command to view your operating mode.
Syntax: show operating-mode
filter date-time in-range <start>
<end>
Returns only the local logs within the specified time/date
range.
Enter the <start> and <end> dates and times in the following
format (including the quotation marks):
“YYYY-MM-DD HH:MM:SS”
Also, enter the time using the 24 hour clock format. For
example, 1:00 pm should by entered as 13:00:00.
Extended Command Option Purpose