TMS zl Management and Configuration Guide ST.1.1.100430

A-204
Command-Line Reference
Product OS Show Commands
show port-map
This command shows all of your port-maps.
Syntax: show port-map
show port-trigger
This command shows your port trigger policies.
Syntax: show port-trigger [trigger name]
show radius-server
This command shows information about your RADIUS server.
Syntax: show radius-server
show rate-limit
This command shows the firewall access policies to which rate-limiting is
applied. You can view the policies according to group or type of policy (unicast
or multicast).
To view a rate-limiting policy, enter the following command:
Syntax: show rate-limit [group <group name>] [id <rule ID>]
Replace <group name> with the name of the group for which you want to view
the policies.
Replace <rule ID> with the rule ID.
show running-config
This command shows the module’s running-configuration. For general trou-
bleshooting, you should enter the show running-config (or just show run)
command.
Syntax: show running-config [display-credentials]
Optionally, use the display-credentials option to display hidden credentials,
such as the RADIUS server secret.