TMS zl Management and Configuration Guide ST.1.1.100430

2-33
Initial Setup in Routing Mode
Initial Setup
The prompt should look like the following:
hostswitch(tms-module-C)#
You can now set up management access on the TMS zl Module so that you can
begin to configure the product’s features.
Option 2
Alternatively, you can access the Product OS context by specifying the
product name for the TMS zl Module. This name never changes. Enter the
following command from either the switch’s manager-level or global configu-
ration context:
For example, if you want to enter the Product OS for a TMS zl Module that is
installed in slot C, enter:
hostswitch# services c name tms-module
The prompt should look like the following:
hostswitch(tms-module-C)#
You can now set up management access on the TMS zl Module so that you can
begin to configure the product’s features.
Syntax: services <slot ID> name tms-module
Moves you to the product OS context on the module.
Replace <slot ID> with the letter for the chassis slot in which
the module is installed.