TMS zl Management and Configuration Guide ST.1.1.100430

2-78
Initial Setup in Routing Mode
Configure Event Logging
2. Under Log Severity, select one of the following:
• Critical
• Major
• Minor
• Warning
• Information
Remember that the less severe the setting, the more events the TMS zl
Module will log, thereby consuming more system resources.
3. Select Enable Log Threshold Monitoring if you want to ensure that logging
will not adversely affect the TMS zl Module’s performance.
4. Configure the throttling setting:
• To suppress duplicate event logs, select the Enable Throttling check
box.
• To have the TMS zl Module log all events, including identical ones,
clear the Enable Throttling check box.
5. If you have enabled throttling, in the space provided, type the number of
duplicate messages that you want to occur before a tally message is
forwarded.
Figure 2-41. Duplicate Message Text Box
6. In the space provided, type the number of seconds that you want to pass
before a tally message is forwarded.
Figure 2-42. Time Limit Text Box
7. Click Apply My Changes.
8. Click Save.
View and Export Local Logs
To view or export local logs, click System > Logging > View Log.