TMS zl Management and Configuration Guide ST.1.1.100430

2-95
Initial Setup in Routing Mode
System Maintenance
Erase the Startup-Config and Return to Defaults
You can erase the startup configuration. This action erases your configuration
changes and returns them to factory defaults. However, your IDS/IPS signa-
tures are retained.
You can erase the startup configuration from two places:
■ Web browser interface
■ CLI Product OS
If you are unable to access the Web browser interface, you can use the CLI
Product OS to restore the module’s IP settings. If you are unable to access
either the Web browser interface or the CLI Product OS, you must uninstall
and reinstall the module. For more information, see “Restore to Factory
Default Settings (Including IDS/IPS Signatures)” on page 2-97.
Erase the Startup Configuration from the Web Browser
Interface
To restore the module to the factory default configuration:
1. Click System > Maintenance and click the Erase Startup-Config tab.
Figure 2-57. System > Maintenance > Erase Startup-Config Window
2. Click Erase Startup-Config and Reboot.
3. Click Yes in the warning window that is displayed. The module then
reboots with the factory-default settings but the current IDS/IPS signa-
tures.