TMS zl Management and Configuration Guide ST.1.1.100430

2-98
Initial Setup in Routing Mode
System Maintenance
For example:
hostswitch(services-module-C:HD)# show images
--------Image Repository---------
1) ST.1.1.100330
2) ST.1.1.100226
3) ST.1.0.090603
If the latest software image is not in the image
repository, follow
steps 1 through 9 in “Update the Software with a USB
Drive” on page 2-104 to transfer the image folder to
the module.
6. Uninstall the current product software:
For example:
hostswitch(services-module-C:HD)# uninstall product
7. Reinstall the product software:
For example, if the image directory is named ST.1.1.100330, you would
type:
hostswitch(services-module-C:HD)# install product
ST.1.1.100330
You can type the first few letters of the image directory name, then press
[Tab] to complete the name. You might need to type the last few characters
to complete the name.
Syntax: uninstall product
Uninstalls the current TMS zl Module software.
Press
[Enter] or [y] for any prompts that are displayed.
Syntax: install product <directory>
Installs the latest software version on the TMS zl Module.
Replace <directory> with the name of the directory that
contains the new software image.
Press
[Enter] for any prompts that are displayed.