TMS zl Management and Configuration Guide ST.1.1.100430

3-37
Initial Setup in Monitor Mode
Management Settings
Management Settings
This section describes how to:
■ Modify the IP settings used to access and manage the TMS zl Module
■ Change management users’ passwords
■ Configure RADIUS authentication for management users
Modify the Module’s IP Settings
To access the Web browser interface, you configured a set of management
settings. You assigned a management VLAN and IP address, as well as a default
gateway. But you can change these settings in the Web browser interface.
To view or change the module’s management settings, complete the following
steps.
1. Select System > Settings and click the General tab.
Figure 3-17. System > Settings > General Window
2. Under Management IP Configuration, configure the following:
a. For VLAN ID, type the management VLAN ID.