TMS zl Management and Configuration Guide ST.1.1.100430

3-40
Initial Setup in Monitor Mode
Management Settings
2. Select the Enable RADIUS for management user authentication check box.
The setting is applied as soon as you select the check box.
You must also specify the external RADIUS server that will authenticate
management users:
1. Click the RADIUS tab.
Figure 3-20. Network > Authentication > RADIUS Window
2. Under RADIUS Settings, for Authentication Protocol, select the protocol that
the TMS zl Module uses to communicate with all of your RADIUS servers.
Options include:
• MS-CHAPv1
• CHAP
•PAP
3. Click Add RADIUS Server. The Add RADIUS server window is displayed.