TMS zl Management and Configuration Guide ST.1.1.100430

4-10
Firewall
Named Objects
Table 4-1. Named Objects and Their Uses
Address Objects
Address objects can be configured in three windows of the TMS zl Module’s
Web browser interface:
■ Firewall > Access Policies > Addresses
■ Firewall > NAT Policies > Addresses
■ Firewall > Port Triggers > Addresses
Any object that is created in one window will be displayed in the other two
windows. For example, an address object that is created in the Firewall >
Access Policies > Addresses window will appear on the addresses list in the
Firewall > NAT Policies > Addresses and Firewall > Port Triggers > Addresses
windows.
You can create up to 500 address objects.
You can create four types of address objects:
■ IP—Contains individual IP addresses for one or more network devices
with noncontiguous IP addresses
■ Range—Contains one or more ranges of contiguous IP addresses
■ Network—Contains network addresses for one or more networks or
VLANs. You can also specify a VPN connection with a network address.
■ Domain—Contains one or more URLs or FQDNs
Object Type Firewall NAT Port Trigger IPsec
Single-entry IP XXXX
Multiple-entry IP X
Single-entry Range X X X
Multiple-entry Range X
Single-entry Network X X X
Multiple-entry Network X
Multiple-entry Domain
name
X
Single-port service X X X
Port-range service X X
IANA IP protocol X X
Address groups X
Service groups X X
Schedule X