TMS zl Management and Configuration Guide ST.1.1.100430

4-19
Firewall
Named Objects
5. If you selected TCP or UDP in step 4, in the Port(s) fields, type the port
number range. If there is only one port number, type it in the first field.
When creating a service object for a well-known service on an alternative
port, you may also need to configure a port-to-service association. (See
“Port Mapping” on page 4-85.)
6. Click Apply.
7. Add another service object or click Close.
8. Click Save.
Service Groups
Service groups are user-defined groupings of service objects. Any number of
service objects can be placed in a service group, and a service object can be
in more than one service group. You can create up to 500 service groups, each
with up to 500 service objects.
To add a service group, follow these steps:
1. Click one of the following:
• Firewall > Access Policies and click the Service Groups tab
• Firewall > NAT Policies and click the Service Groups tab
Figure 4-8. Firewall > Access Policies > Service Groups Window
2. Click Add Service Group.