TMS zl Management and Configuration Guide ST.1.1.100430

4-64
Firewall
User Authentication
This window displays each RADIUS server’s:
■ Address
■ NAS Identifier
■ Domain name
■ Setting for stripping the domain (enabled on not)
You can configure up to three RADIUS servers in each domain. If you configure
more than one RADIUS server in a single domain, the TMS zl Module treats
these RADIUS servers as a pool, rather than assigning primary and backup
servers. When processing authentication requests, the TMS zl Module uses a
round robin approach to contacting the RADIUS servers you have configured.
To configure the settings for an external RADIUS server, complete the follow-
ing steps.
1. Under RADIUS Settings, select an authentication Protocol from the list.
This is the protocol that the TMS zl Module will use to communicate with
all of your RADIUS servers. Options include:
• MSCHAP-v1
• CHAP
•PAP
You can configure up to three RADIUS servers on each domain. To add a
RADIUS server, complete the following:
1. Click Add RADIUS Server. The Add RADIUS server window is displayed.